top of page

SII DESIGN KILN

Design / Construction

 

  • All aluminum structures with aluminum or 304 stainless steel insulated wall panels are designed for your local wind and snow loads.

*Meets local building codes

 

  • All roofs are constructed with 304 stainless steel insulated panels. *Corrosion resistant

 

  • Exterior wall and roof insulation panels are "ship lapped" design and are "open backed" to utilize passive ventilation which keeps insulation dry (factory installed insulation guarantees quality)

*Maintain insulation values

 

  • Building insulation values ranging from R-22 to R-34.

*Saves heating energy

 

  • Fan decks constructed of 0.050" aluminum for safe maintenance access.

*Safe / sturdy floor to walk on

 

  • Manually opened R-Lok non-bolted 3" thick R-20+ doors.

*Simple operation

OR

  • Hydraulically opened 5" thick corrugated exterior skins with R-24 rating.

*Allows for 1 man operation

 

  • Aluminum corrugated or standing seam roofing with no vents or penetrations in roof.

*Eliminate roof leaks

 

  • All roof slopes are 1/12 pitch exceeding any other kiln manufacturer's design.

*Eliminates ponding roof water

 

  • Roof mounted Air-Foil passive ventilators move dry ambient air across roof insulation to keep it dry.

*Maintains insulation values

Air Flow

 

  • Heavy duty aluminum center fan wall with stacked fans and direct drive motors for ground level inspection and easy maintenance, provides air speeds up to 600 FPM.

 

  • Aluminum baffles (horizontal and vertical) ensure maximum air circulation through the lumber.

*Less by-pass air reduces energy costs

 

  • Variable pitch "Smithco" fans provide maximum efficiency.

*SII is an authorized SMITHCO distributor

 

  • Variable speed fan controls provide flexibility for varous species and thicknesses tremendous energy saving.

*ROI in less than 18 months

 

  • The most uniform air flow and heat distribution available by any design or manufacturuer.

Vent / Humidification Systems

 

  • SII offers vents in several styles to meet various drying requirements, passive on/off pneumatic, electric modulating, or powered vents with either pneumatic or electric actuators.

*Provides greater flexibility

 

  • Conditioning steam spray or our "EMC Mistifyer" cool water spray systems utilize stainless steel spray manifolds to eliminate rust stained lumber.

 

  • Insulated and gasketed vent bodies and lids.

*Minimize condensation and corrosion

 

  • "EMC Mistifyer" high pressure (800-1200 psi) cool water spray system.

*Saves boiler chemicals and steam

Heating System

 

  • Heating exchange coils are constructed of 0.083" stainless tube with aluminum fins utilizing steam, hot water, or thermal oil.

*Longer lasting

 

  • Modulating heat valves with properly matched "float and thermostatic" traps provide consistent heat and condensated flow.

 

  • Multi-zoned heat distribution allows larger holding capacity while blowing through less lumber depth before re-heating.

Production

 

  • Holding capacities up to 250,000 bd. ft.

bottom of page